How to create 3-dimensional fabric structures using a new embroidery technique called TFP (Tailored Fibre placement) CTT Group is proud to announce the acquisition of a new cutting-edge equipment: a ZSK Technical Embroidery Machine. Among various capabilities, our newest equipment… Read More
Need to determine the shelf-life of Personal Protection Equipment?
The shelf life of PPE (Personal Protection Equipment), such as medical face masks and isolation gowns, needs to be guaranteed by the manufacturer. To validate if the performance properties of the packaged PPE after 2 years will remain unchanged, the… Read More
What is the Acceptable Quality Level AQL 4.0% in AAMI PB70-2012 ?
What is the AQL 4.0% and the RQL 20% mentioned in the AAMI PB70-2012 specification? A statistical approach has been developed to limit the producer’s risk (the highest defective rate considered acceptable in the process) and the consumer’s risk (the… Read More
Performance of Nitrile Examination Gloves for Medical Application, in accordance with ASTM D6319
This specification is intended as a referee procedure for evaluating the performance and safety of nitrile rubber examination gloves. Requirements are established for nitrile rubber gloves used in conducting medical examinations and diagnostic and therapeutic procedures. Physical material tests and… Read More
Liquid barrier textiles for protective apparel and drapes used by health care facilities are tested in our laboratories
Liquid barrier textiles for protective apparel and drapes used by health care facilities are tested and classified in 4 different levels, as per AAMI / ANSI PB 70. This specification is designed for surgical gowns, surgical drapes, and other protective… Read More
A SMART CAR SEAT
Current vehicles are not yet equipped with all the artificial intelligence needed to interact with the driver and assess his ability to drive his vehicle or his condition, but we are getting closer and closer. The connected car industry is… Read More
APPOINTEMENT OF NEW PRESIDENT/CHIEF EXECUTIVE OFFICER OF CTT GROUP
Saint-Hyacinthe, October 23rd, 2019 – Mr. Robert Bélanger, President of the Board of Directors of the CTT Group and President of Belt-Tech Products inc., is pleased to announce the appointment of Mr. Olivier Vermeersch as President/Chief Executive Officer of the… Read More
EXOSKELETON : A POSSIBILITY IN THE TEXTILE WORLD
It is with great pride that the CTT Group and the Composites Development Center of Quebec (CDCQ) have joined forces to work on an applied research project with Mawashi Science and Technology, in collaboration with Mat-Comp and École Polytechnique Montréal.